Defi 5T "AED Trainer" IR remote control
Note: The remote control battery access is located on the back side of the remote control. To open the battery compartment, the user should slide the tab on the left side to the left and pull the compartment away from the remote. Replace the 3V Lithium (CR2025) battery positive side up. Be sure that the batteries protector is fixed if the trainer was not used for a long time.
! CAUTION: Use of the remote control should not exceed 8 meters, make sure that the remote control aims at the IR window vertically. If the remote control doesn't work well, probably because the battery power is low, try to replace the battery to ensure proper use.
The handhold remote control for the Trainer provides the Instructor with significant control over the configuration of the Trainer. The remote control communicates with the Trainer via an IR window located next to the PADs connector. A status indicator LED is located next to the IR window, and it will flash to indicate that a correct command has been received. The status indicator LED will flash continuously when a scenario has been paused. Refer to the diagram and descriptions listed below.
Allow the Instructor to select AHA Scenario number 1 or 5 as the default scenario. The Trainer will automatically turn off when the selection has been made.
Allow the Instructor to select AHA Scenario number 2 or 3 as the default scenario. The Trainer will automatically turn off when the selection has been made
Allow the Instructor to select AHA Scenario number 4 or 6 as the default scenario. The Trainer will automatically turn off when the selection has been made
Allow the Instructor to select AHA Scenario number 7 as the default scenario. The Trainer will automatically turn off when the selection has been made.
Allow the Instructor to select AHA Scenario number 8 as the default scenario. The Trainer will automatically turn off when the selection has been made.
Allow the Instructor to select DEFI5T trainer Scenario 6 as the default scenario. The Trainer will automatically turn off when the selection has been made.
Allow the Instructor to select DEFI5T trainer 7 as the default scenario. The Trainer will automatically turn off when the selection has been made.
Allow the Instructor to select DEFI5T trainer 8 as the default scenario. The Trainer will automatically turn off when the selection has been made.
Allow the Instructor to select DEFI5T trainer 9 as the default scenario. The Trainer will automatically turn off when the selection has been made.
Allow the Instructor to interrupt any scenario with a continuous shock-able rhythm. The current default scenario is not changed.
Allow the Instructor to interrupt any scenario with a continuous non-shock-able rhythm. The current default scenario is not changed.
Allow the Instructor to interrupt any scenario with a electrode-off condition. To resume the scenario, press the button again.
Allow the Instructor to interrupt any scenario with a “Motion” condition on the next rhythm analysis.
Allow the Instructor to interrupt any scenario with a Low Battery condition. To resume the scenario, press the button again.
Allow the Instructor to select the prompt voice language.
Allow the Instructor to pause the trainer during any scenario.
To resume the scenario, press the play button when the Trainer paused, all other buttons are inactive until the play button has been pressed.
Note: The remote control battery access is located on the back side of the remote control. To open the battery compartment, the user should slide the tab on the left side to the left and pull the compartment away from the remote. Replace the 3V Lithium (CR2025) battery positive side up. Be sure that the batteries protector is fixed if the trainer was not used for a long time.
! CAUTION: Use of the remote control should not exceed 8 meters, make sure that the remote control aims at the IR window vertically. If the remote control doesn't work well, probably because the battery power is low, try to replace the battery to ensure proper use.
The handhold remote control for the Trainer provides the Instructor with significant control over the configuration of the Trainer. The remote control communicates with the Trainer via an IR window located next to the PADs connector. A status indicator LED is located next to the IR window, and it will flash to indicate that a correct command has been received. The status indicator LED will flash continuously when a scenario has been paused. Refer to the diagram and descriptions listed below.
Allow the Instructor to select AHA Scenario number 1 or 5 as the default scenario. The Trainer will automatically turn off when the selection has been made. Allow the Instructor to select AHA Scenario number 2 or 3 as the default scenario. The Trainer will automatically turn off when the selection has been made Allow the Instructor to select AHA Scenario number 4 or 6 as the default scenario. The Trainer will automatically turn off when the selection has been made Allow the Instructor to select AHA Scenario number 7 as the default scenario. The Trainer will automatically turn off when the selection has been made. Allow the Instructor to select AHA Scenario number 8 as the default scenario. The Trainer will automatically turn off when the selection has been made. Allow the Instructor to select DEFI5T trainer Scenario 6 as the default scenario. The Trainer will automatically turn off when the selection has been made. Allow the Instructor to select DEFI5T trainer 7 as the default scenario. The Trainer will automatically turn off when the selection has been made. Allow the Instructor to select DEFI5T trainer 8 as the default scenario. The Trainer will automatically turn off when the selection has been made. Allow the Instructor to select DEFI5T trainer 9 as the default scenario. The Trainer will automatically turn off when the selection has been made. Allow the Instructor to interrupt any scenario with a continuous shock-able rhythm. The current default scenario is not changed. Allow the Instructor to interrupt any scenario with a continuous non-shock-able rhythm. The current default scenario is not changed. Allow the Instructor to interrupt any scenario with a electrode-off condition. To resume the scenario, press the button again. Allow the Instructor to interrupt any scenario with a “Motion” condition on the next rhythm analysis. Allow the Instructor to interrupt any scenario with a Low Battery condition. To resume the scenario, press the button again. Allow the Instructor to select the prompt voice language. Allow the Instructor to pause the trainer during any scenario. To resume the scenario, press the play button when the Trainer paused, all other buttons are inactive until the play button has been pressed.
